Harris Fluorescent Spray Paint (Choose Your Colour)

Harris Fluorescent Spray Paint is quick drying interior/exterior enamel that gives a durable protective finish and can be used on metal, wood or almost any other surfaces, indoor or outdoor.

APPLICATION:

• Protect surrounding areas with newspapers, drop
  cloth, etc.
• Can temperature should be between 700 F and 800 F.
• Shake can vigorously for at least one minute after mixing ball rattles.
• Hold can 12″ to 16″  from surface to be painted and direct opening in spray button at object.
• Press spray button firmly using steady, even strokes while spraying. It is recommended that you spray two or three thin coats for best results.
• Clean spray button immediately after use by turning cap upside down and pressing button until no more paint comes out.

Surface Preparation:

• Surface must free of dirt, grease, silicones, etc. Protect surrounding areas with newspapers, drop
  cloth, etc.

New Metal Surfaces:

• Prime steel or iron with Spray Primer.
• Allow 30 min. to recoat when using Spray Primer.